Retaining walls / Northern Utah
Engineered block, boulder and natural stone retaining walls across Northern Utah.
A retaining wall turns an unusable slope into level, living space — but only if what is behind the block is right. R2 builds walls that hold the grade, move the water, and still look like they belong on the property.
Why walls fail
A wall that bulges, separates at the caps or tips forward is telling you what was skipped: no compacted base, no drainage rock, no drain line, no geogrid, and clay backfilled tight against the block. Water and freeze-thaw do the rest. Age is rarely the cause, and a wall that was built correctly does not reach a point where it starts to lean.
What is inside an R2 wall
Over-excavation behind the wall line and a compacted aggregate base below grade, set level and to depth. The first course decides every course above it.
Clean drainage rock behind the block with a perforated drain line and filter fabric, piped to daylight or a drainage system, so hydrostatic pressure never builds behind the wall.
Soil reinforcement installed at the intervals the height and surcharge require. This is what makes a tall wall a reinforced mass instead of a stack of block.
Walls over four feet, tiered walls, and walls carrying a driveway, pool or structure get stamped engineering and city permitting, coordinated by us rather than handed to you.
Backfilled in lifts and compacted as the wall rises, with the finished grade behind it shaped to shed water rather than pond against the structure.
Adhered caps, integrated steps, corners and terminations detailed so the wall reads as designed architecture, and cleanup that leaves the site ready for the next phase.
Choosing the wall
Height, soil, what sits above the wall, drainage outfall and the architecture of the home all narrow the choice before taste enters the conversation. We will tell you which options actually work on your slope, and which ones only look good in a photograph of someone else’s.
Three ways to hold a grade
Clean geometry, predictable engineering and the most usable space per foot of height. The default where the wall has to carry load or hold a precise line.
Suited to natural hillside settings, forgiving of irregular grade, and often less expensive to build at moderate heights. Reads as landform rather than structure.
The premium finish, for walls that sit in the middle of the living space and get looked at and touched every day. Stone face over a structural core.
How we build it
We confirm heights, soils, surcharge, setbacks and where the water goes, then determine whether the wall needs engineering and a permit.
Excavation, compacted base and the first course are set and checked before a single block goes above grade.
Block, drainage, geogrid and compacted backfill rise together, then caps, steps and cleanup hand the site to the next phase.
Our work
The right fit
Retaining walls are Phase 02 of an R2 build and a common starting point on hillside lots in Kaysville, Fruit Heights, Layton, Ogden, Huntsville and Mountain Green, where a well-placed wall is the difference between a yard you walk across and a yard you live in. We also take walls on directly, including replacing one that has already started to move.
Common questions
Almost always because of what was skipped behind the block: no compacted base, no drainage rock, no drain line, no geogrid, and clay backfilled tight against the wall. Water and freeze-thaw do the rest.
Walls over four feet, tiered walls, and any wall carrying a driveway, pool or structure generally need stamped engineering and city permitting. We coordinate that rather than handing it to you.
The site usually decides. Engineered block gives clean geometry and the most usable space per foot of height. Boulder walls suit natural hillside settings and often cost less at moderate heights. Natural and veneered stone is the premium finish where the wall sits in the living space.
Sometimes, but be careful of anyone who promises it cheaply. A wall that is moving is usually missing drainage or reinforcement, and neither can be added from the front. Most of the time the honest answer is a rebuild of the failed section.
As tall as the engineering supports. Past four feet, or where something sits above the wall, the height stops being a design question and becomes a structural one with a stamp attached.
Tell us about the property. We’ll walk it with you, at no cost.
Start Your Project ↗